HumminGuru Orbit Vinyl Record Static Remover

Re-define a Simpler Way to Eliminate Static  

Vinyl records accumulate static charges due to friction, primarily from stylus drag during playback and when removing the record from the jacket and sleeve. This static buildup can lead to unwanted pops, crackles, and distortions in the audio. The HumminGuru Orbit Vinyl Record Static Remover provides a hands-free solution, essential for audiophiles seeking smooth record playback and an enhance listening experience. With its pioneering "rotating" design, the Orbit offers a highly effective way to neutralize static electricity by emitting + /- ions directly onto the record surface during rotations. By simply pressing the start button, and the Orbit will perform 10 rotations, delivering a clearer record free from electrostatic noise. Portable and convenient, the Orbit is a great tool to use before each playback, ensuring a remarkable audio journey with its exquisite sound quality.

HumminGuru Orbit Vinyl Record Static Remover

Automatic Design 

With a simple press of the start button, the Orbit will automatically rotate on the record platter for 10 cycles and stop once the static removal process is completed. With its innovative "rotating" design, it emits both (+/-) ions with a consistent distance of 23mm above the record, ensuring effective static neutralization. 

HumminGuru Orbit Static Remover

Positive and Negative Ion Discharge

Equipped with two sets of Plasma output and a high-speed fan, the Orbit discharges over 50 million pcs of each +/- ions per cubic centimeter. In essence, the Orbit releases an equal amount of both + and - ions onto the vinyl record's surface simultaneously during rotations, while its operating design ensures a consistent distance above the record for effective static removal.

HumminGuru Orbit Static Remover

Required Space & Spindle Height

The Orbit requires an unrestricted space on a turntable platter with a minimum diameter of 326 mm (12.83 inches) for rotation. And, the spindle height with applied record shall not exceed 11mm.

HumminGuru Orbit Static Remover

Rechargeable 

The Orbit can be recharged with the provided USB-C cable and each charge can use up to ≥100 uses. The battery indicator lights serve as a reminder of the power status. 

Orbit Static Remover

HumminGuru Orbit

How it works: 

Step 1 : Powering on the device

Slide the power switch located on the back side to the left.

HumminGuru Orbit Static Remover

Step 2 : Positioning the device

Carefully place the device on top of the turntable with a record on it. Align the spindle hole of the device with the turntable spindle. Ensure that the device does not come into contact with any surrounding objects or parts on top of the turntable platter while operating.

HumminGuru Orbit Static Remover

Step 3 : Starting the device

Press the start/stop button to initiate the operation mode. The device will rotate for 10 rounds, effectively eliminating static from the vinyl record. After completing the 10 rotations, the device will automatically stop.

HumminGuru Orbit Static Remover

Step 4 : Cycle complete

Once the cycle is complete, slide the power switch to the right to turn off the device. Carefully lift and remove it from the turntable spindle in an upward direction.

HumminGuru Orbit Static RemoverNotes: The effectiveness of static removal may vary depending on factors such as the material of the vinyl record, temperature, humidity, and the type of turntable platter, etc. Package includes HumminGuru Orbit / USB-C Charging Cable / Cleaning Brush / Owner’s Manual

Watch the Demo Video

 

Pre-orders: September 16 - October 16, 2024 (Limited quantity).
Shipping for pre-orders starts by the end of October 2024.